Pumps
Electric pump units of the series: PR V; NPR; PR.
Electric pump units of ПРВ; НПБР; ПР series are designed for pumping ore enrichment and alumina production products, sand and other hydraulic mixtures with a hydrogen index (pH) from 6 to 12, kinematic viscosity of no more than 1.008 mm2/s, with a density of up to 1900 kg/m3, with a volume concentration of solid particles of up to 30%, a size of solid particles of no more than 6 mm, a temperature from + 5°C to + 60°C.
The flow part of the pumps (impeller, front and rear linings), which are subject to abrasive wear are made of rubberized wear-resistant rubber, which ensures reliability in operation at processing plants. The external surfaces of the pumps are protected against corrosion by paint coating: epoxy enamels over a primer undercoat.
ELECTRIC PUMP UNIT PRUM100.400.160 / 20 (with axial input)
| pH value | from 6 to 12 |
| Densify of the product (abrasive pulp), kg/m3 | up to 1900 |
| Volume concentration of solid particles | up to 30% |
| Size of solid particles, mm, not more than | 6 |
| Temperature of the product | from +50С до + 600С |
| Feeding, m3/hour | 160 |
| Pressure, m | 20 |
| Engine power, kW | 37 |
| Overall dimensions, mm | |
| length | 2588 |
| width | 808 |
| height | 942 |
| Weight of the unit, kg | 1328 |
It is allowed to equip the units with other electric motors corresponding in design, power and speed. It is possible to change the overall dimensions and weights of the units in accordance with all necessary requirements.
THE UNIT IS AN ELECTRIC PUMP NPB 100 – 400 – 160 / 20
| pH value | from 6 to 12 |
| Densify of the product (abrasive pulp), kg/m3 | up to 1900 |
| Volume concentration of solid particles | up to 30% |
| Size of solid particles, mm, not more than | 6 |
| Temperature of the product | from +50C to +600С |
| Feeding, m3/hour | 160 |
| Pressure, m | 20 |
| Engine power, kW | 37 |
| Overall dimensions, mm | |
| length | 2200 |
| width | 796 |
| height | 850 |
| Weight of the unit, kg | 1163 |
THE UNIT IS AN ELECTRIC PUMP NPB 150 – 550 – 250 / 28
| pH value | from 6 to 12 |
| Densify of the product (abrasive pulp), kg/m3 | up to 1900 |
| Volume concentration of solid particles | up to 30% |
| Size of solid particles, mm, not more than | 6 |
| Temperature of the product | from +50C to +600С |
| Feeding, m3/hour | 250 |
| Pressure, m | 28 |
| Engine power, kW | 75 |
| Overall dimensions, mm | |
| length | 1690 |
| width | 1060 |
| height | 1780 |
| Weight of the unit, kg | 2564 |
ELECTRIC PUMP UNIT PR V 630 / 12.5
| pH value | from 6 to 8 |
| Densify of the product (abrasive pulp), kg/m3 | up to 1500 |
| Volume concentration of solid particles | up to 30% |
| Size of solid particles, mm, not more than | 3 |
| Temperature of the product | from +50C to +600С |
| Feeding, m3/hour | 630 |
| Pressure, m | 12,5 |
| Engine power, kW | 55 |
| Overall dimensions, mm | |
| length | 2412 |
| width | 1330 |
| height | 3120 |
| Weight of the unit, kg | 3182 |
ELECTRIC PUMP UNIT PR400 / 38
| pH value | from 6 to 12 |
| Densify of the product (abrasive pulp), kg/m3 | up to 1900 |
| Volume concentration of solid particles | up to 30% |
| Size of solid particles, mm, not more than | 6 |
| Temperature of the product | from +50C to +600С |
| Feeding, m3/hour | 400 |
| Pressure, m | 38 |
| Engine power, kW | 132 |
| Overall dimensions, mm | |
| length | 1785 |
| width | 1066 |
| height | 1740 |
| Weight of the unit, kg | 2630 |
ELECTRIC PUMP UNIT PR800 / 31.5
| pH value | from 6 to 12 |
| Densify of the product (abrasive pulp), kg/m3 | up to 2200 |
| Volume concentration of solid particles | до 35% |
| Size of solid particles, mm, not more than | 6 |
| Temperature of the product | from +50C to +600С |
| Feeding, m3/hour | 800 |
| Pressure, m | 31,5 |
| Engine power, kW | 160 |
| Overall dimensions, mm | |
| length | 2540 |
| width | 1340 |
| height | 1912 |
| Weight of the unit, kg | 4842 |
ELECTRIC PUMP UNIT PR1250 / 31.5
| pH value | from 6 to 12 |
| Densify of the product (abrasive pulp), kg/m3 | до 1600 |
| Volume concentration of solid particles | до 35% |
| Size of solid particles, mm, not more than | 6 |
| Temperature of the product | from +50C to +600С |
| Feeding, m3/hour | 1250 |
| Pressure, m | 31,5 |
| Engine power, kW | 200 |
| Overall dimensions, mm | |
| length | 3357 |
| width | 1340 |
| height | 2125 |
| Weight of the unit, kg | 4792 |
Electric pump units: VSHN 150; 6SH8; 8SH8; 8S8.
Pumps of the type ЗГМ2М;6Ш8;6Ш8 Е; 6Ш82; 8Ш8; 8С8; ВШН150; ВШН150 Е and electric pump units based on them are used in the mining and coal industry and also used in mines, quarries and open pits in drainage systems for pumping mine and quarry waters from mine workings.
In the oil and gas industry they are used for auxiliary operations when pumping flushing fluid used in well drilling, spent flushing fluid to the hydrocyclone unit for cleaning from the drilled-out rock, and also as a booster pump to the main drilling pumps.
Electric pump unit 3GM-2M
| pH value | from 6 to 8 |
| Densify of the product (abrasive pulp), kg/m3 | up to 1300 |
| Volume concentration of solid particles | up to 15% |
| Size of solid particles, mm, not more than | 180 |
| Temperature of the product | from +40C to +600С |
| Feeding, m3/hour | 1900 |
| Pressure, m | 58 |
| Engine power, kW | 630 |
| Overall dimensions, mm | |
| length | 4033 |
| width | 1960 |
| height | 1760 |
| Weight of the unit, kg | 7815 |
Electric pump unit VSHN-150
| pH value | from 6 to 8 | |
| Densify of the product (abrasive pulp), kg/m3 | up to 1300 | |
| Volume concentration of solid particles | up to 20% | |
| Size of solid particles, mm, not more than | 20 | |
| Temperature of the product | from +50С to +500С | |
| Feeding, m3/hour | 150 | |
| Pressure, m | 30 | |
| Engine power, kW | 30 | |
| Engine type | ВПР-180М4 | ВА250М4 |
| Overall dimensions, mm | ||
| length | 625 | |
| width | 860 | |
| height | 1750 | |
| Weight of the unit, kg | 750 | 805 |
Electric pump units 6SH8, 6SH8-2, 8SH8, 8C8
| 6Ш8 | 6Ш8Е | 6Ш8-2 | 6Ш8-2Е | 8Ш8 | 8Ш8Е | |
| pH value | from 6 to 8 | from 6 to 8 | from 6 to 8 | |||
| Densify of the product (abrasive pulp), kg/m3 | up to 1500 | up to 1500 | up to 2500 | |||
| Volume concentration of solid particles | up to 30% | up to 30% | up to 30% | |||
| Size of solid particles, mm, not more than | 20 | 20 | 20 | |||
| Temperature of the product | from +40С до +400С | from +40С до +400С | from +50С до +400С | |||
| Feeding, m3/hour | 250 | 150 | 560 | |||
| Pressure, m | 54 | 33 | 35 | |||
| Engine power, kW | 90 | 30 | 110 | |||
| Engine type | 4АМ280М4 | ВА250М4 | АИР180М4 | ВА180М4 | АИР315S6 | ВА315М4 |
| Overall dimensions, mm | ||||||
| length | 2270 | 1860 | 2850 | |||
| width | 780 | 558 | 960 | |||
| height | up to 1500 | up to 1500 | up to 2500 | |||
| Weight of the unit, kg | 1105 | 1180 | 695 | 755 | 2990 | 3180 |
| 8С8 (раб. колесо 510) | 8С8Е (раб. колесо 510) | 8С8 (раб. колесо 545) | 8С8Е (раб. колесо 545) | |
| pH value | from 6 to 8 | from 6 to 8 | ||
| Densify of the product (abrasive pulp), kg/m3 | up to 2200 | up to 2200 | ||
| Volume concentration of solid particles | up to 30% | up to 30% | ||
| Size of solid particles, mm, not more than | 20 | 20 | ||
| Temperature of the product | from +50С to +600С | from +50С to +600С | ||
| Feeding, m3/hour | 360 | 360 | ||
| Pressure, m | 35 | 42 | ||
| Engine power, kW | 110 | 160 | 160 | |
| Engine type | АИР315S6 | ВА02-315М6 | АИР355S6 | ВА02-315М6 |
| Overall dimensions, mm | ||||
| length | 2880 | 2990 | ||
| width | 870 | 870 | ||
| height | 1180 | 1180 | ||
| Weight of the unit, kg | 2564 | 3044 | 2912 | 3044 |
Our pumps are characterized by high productivity, stable operation under constant high loads, reliability, ease of operation and maintenance.
At the request of the customer, electric pump units are supplied with a frequency converter and are equipped with sumpers, contact vats with a system for maintaining the level of the pumped product with an automatic mode of switching to a backup pump in case of failure of the main one.
The plant guarantees its customers high quality, reliability and safety in the operation of equipment, competitive prices, uninterrupted supply of spare parts, as well as various types of service.
A powerful production base, active innovation, quality and reliability of manufactured equipment have allowed us to take one of the leading positions in the field of domestic production of pumps.
We will help you to find a pump that is manufactured with state-of-the-art technology and meets all the necessary requirements.